Lbl-lighting Fusion Jack Canopy 3 Light Rectangle LED Uživatelský manuál stáhnout pdf (Strana 2)

Secure the mounting plate to the anchors with the provided

#8 screws.

#8 SCREW

SAFETY CABLE

Insert one end of the safety cable into the mounting plate

safety bracket and insert the other end into the housing safety

bracket.

Repeat step 9 for the other safety cable.

SAFETY BRACKET

HOUSING

MOUNTING PLATE

FUSION

JACK PORT

FIXTURE

FUSION

JACK

Screw each fixture Fusion Jack completely into the Fusion Jack

port.

Turn the power on.

SAVETHESE INSTRUCTIONS!

Make sure the mounting plate is grounded in accordance with

local electrical codes.

Connect the housing white wire to the neutral power line wire

with a wire nut.

Connect the housing black wire to the hot power line wire

with a wire nut.

Place all wires and wire nut connections properly inside

the housing.

CAUTION: load perRISK OF FIRE. Maximum

port is watt.60 Do Not Overload!

Slide the housing onto the mounting plate and line up the

housing holes with the mounting plate holes.

Replace and tighten the six #8-32 screws to secure the

housing in place.

1E 1H

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

registered trademark of LBL Lighting. LBL Lighting reserves the right to

change specifications for product improvements without notification.

A Generation Brands Company

17 17

1 2

Žádné komentáře

Lbl-lighting Fusion Jack Canopy 3 Light Rectangle LED Uživatelský manuál Strana 2